D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: ZiKE! on February 05, 2012, 02:27:15 AM

Title: How do I remove a computer from the list of LAN COMPUTERS?
Post by: ZiKE! on February 05, 2012, 02:27:15 AM
Under
192.168.0.1/Status/Device_Info.shtml
I have found LAN COMPUTERS that are not mine. How do I kick these away?

Like this one:
192.168.0.169   Kajsas-iPhone   78:a3:e4:bf:48:ef
Title: Re: How do I remove a computer from the list of LAN COMPUTERS?
Post by: FurryNutz on February 05, 2012, 08:10:49 AM
Is your WiFi secured and give to those only that you allow on your network?
Use single mode G or mixed G and N Modes.
Setup a SSID name on the router for your use and Preferred security is WPA-Personal. WPA2/Auto TPIK and AES or AES only. Some devices don't support AES.
Title: Re: How do I remove a computer from the list of LAN COMPUTERS?
Post by: ZiKE! on February 05, 2012, 08:44:13 AM
It says:

WIRELESS LAN

Wireless Radio :Enabled
802.11 Mode : Mixed 802.11n, 802.11g and 802.11b
Channel Width :20MHz
Channel :11
WISH : Active
Wi-Fi Protected Setup :Enabled/Configured

and "WPA2 Only" and 802.11 "n", "g" and "b". Should I loose the  "b"?

My WIFI-password is not in any dictionary...

Title: Re: How do I remove a computer from the list of LAN COMPUTERS?
Post by: thecreator on February 05, 2012, 10:02:33 AM
Quote from: ZiKE! on February 05, 2012, 02:27:15 AM
Under
192.168.0.1/Status/Device_Info.shtml
I have found LAN COMPUTERS that are not mine. How do I kick these away?

Like this one:
192.168.0.169   Kajsas-iPhone   78:a3:e4:bf:48:ef

Hi ZiKE!,

Is your Network Secure? Do you have the Network Filter on to reject people trying to contact?

Your example, isn't a LAN Computer but an iPhone.

http://192.168.0.1/Basic/Network.shtml (http://192.168.0.1/Basic/Network.shtml)

If you don't want it there, then click the last icon on the right side, which is delete and delete it.

http://192.168.0.1/Advanced/MAC_Address_Filter.shtml (http://192.168.0.1/Advanced/MAC_Address_Filter.shtml)

Also turn on your Network Filter to only allow devices listed, access.