D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-645 => Topic started by: RPM on February 15, 2012, 01:47:11 AM
-
Anyone have this problem? When I connect through WiFi it shows my network and Unidentified Network. Am I doing something wrong?
-
How does this unidentified network appear? In your windows wireless connect app or network icon?
Can you post a picture of it by chance?
What Firmware version is currently loaded? Found on routers web page under status.
Some things to try:
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and Multi-cast Streaming under Advanced/Networking.
What wireless modes are you using? Under Setup/Wireless/Manual.
Try single mode G or mixed G and N?
What security mode are you using? Preferred security is WPA-Personal. WPA2/Auto TPIK and AES. Some WiFi adapters don't support AES, so you might want to try TPIK only.
Any other WiFi routers in the area? Use InSSIDer (http://www.metageek.net/) to find out.
Turn off Short GI and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless.
-
Thanks