D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: Alabama978 on February 18, 2012, 03:30:22 AM
-
On a recent house move the DNS 323 got separated from it's PSU :(
I have found two similar PSU's amongst my boxes unpacked so far. Can someone please tell me if either is for the Dlink?
Details are:
Jentec Technology Ltd - outputs 5V 3A and 12V 3A
CD Coming Ltd - outputs 5V 2A and 12V 2A
Both are wired the same way...
Looking at 4 pin connector diagram
top left - 5V Top right 12V
Bottom two pins Gnd
If either of these aren't the correct PSU then I have to do some more digging ;)
-
The manual is your friend. On page 4 it says: Power Supply 12v 3A, 5v 3A. The manufacturer does not matter, the output is what you are interested in.
-
The manufacturer does not matter, the output is what you are interested in.
I would diagree as the pin configuration is critical. I don' have mine handy, otherwise I'd be happy to answer the question.
-
Based on the information given by Alabama978, the 3A unit is the correct one - I also did a physical check of one of ours before I posted my first reply.
-
Can someone please tell me if either is for the Dlink?
FWIW the PSU that came with my DNS323 is from Jentec and produces a 3A DC output
-
Many thanks to you all for the information :)
It seems the Jentec is the one.
I didn't want to try any until I had some info from the forum as I am not convinced that all manufacturers would use the same pinout.
As for the DNS it will be a test of my memory as I am not 100% sure about the pasword LOL.