D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: BT5 on February 19, 2012, 09:19:02 AM
-
1. What is difference between this two ? http://forums.overclockers.co.uk/showthread.php?t=18225618
2. have it got Emergency room page ?
3. Is it stable ?
4. How many is it speed 150 or 300 mbps ?
this is for now. Please replay me. Thanks
-
1. Someone already replied to this. Check the page you have posted.
2. "H1" hardware revision (AT LEAST) have it.
3. With the last firmware version (v8.02) it's very stable. There have been 2-3 weeks since last reboot and still returns no error both ethernet and wireless.
4. 300 Mbps. But, obviously, under certain conditions and limitations. Read here -> http://forums.dlink.com/index.php?topic=627.0 (http://forums.dlink.com/index.php?topic=627.0)
-
Thanks for quick replay.
So the stable hardware version is H1, right ?
Emergency room page is works with all versions of 615, right ?
Is the router automatically audate it firmware ?
For example if I upgrade with wrong hardware version of D-LINK I can use Emergency page to repair it ?
If in Emergency page I put wrong firmware, is this totally destroy my router.
What is functuons of H1 ? for exmple AP mode, email notificarions ?
Thant is for now. Sorry for many questions
-
I don't know about the stability and the availability of emergency page on other hardware versions except H1.
The router doesn't update itself.
Yes, you can count on emergency page.
-
So, when I upgrade ( if it necessary) and power stops to repair it I must use EMERGRNCY PAGE ?
Have your version got AP mode and email notification ?
The newest firmware for h1 is 8.01 I thing.
Is the range good and about how many is it ?
Which hardware version will you recommend to me ?
Best regards
-
Follows the FW update sticky information.
-
did you mean this http://forums.dlink.com/index.php?topic=42454.0 ?
-
Yes
-
I am interesting for example if I upload D_LINK firmware and power of router stops the easiest way to repair it is with EMERGENCY PAGE ?
If I upload in emergency page wrong firmware again what is the result ? May I again use this emergency page ?
Thanks
-
Emergency page is... emergency page. Yes, yes and yes.
-
Hi again, I am sorry that I ask again and again, but please tell me possibilities of Emergency page. What it was repair, what it was not. Thanks again 8)
-
When something goes wrong, you can rely on it. Plain and simple.
There are 2 big fat reasons for recovery in general:
1. Improperly loaded firmware for any given reason (ex: sudden power outage)
2. Corrupted firmware file.
-
So, If I upload wrong firmware I can repair it ? ;D
So this page is something like BUAL BIOS, but not on 100%
-
How many times do you ask same question ?
You already got many identical answers.
-
OK, If I upload dd-wrt and this totally brick router and repair it with serial connection is emergency page repair automatically ?
-
Which are the safetiest ways to downgrade original firmware ?
-
Just use the Tools - Firmware - Firmware Upgrade function.
-
How good is the signal of this router ? - is it low ? Is transmiter/reseiver weak ?