D-Link Forums

The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1522 => Topic started by: hydrep01 on March 01, 2012, 11:52:05 AM

Title: DAP-1522 with 4 port gigabit
Post by: hydrep01 on March 01, 2012, 11:52:05 AM

Hello, i have 3 access point with this model, why whit rj45 port are not connected at 1 Gb

Title: Re: DAP-1522 with 4 port gigabit
Post by: FurryNutz on March 01, 2012, 12:11:27 PM

Are your wired devices supporting Gb network cards?
Swap out LAN cables. Cat6 is recommended for Gb connections.

Title: Re: DAP-1522 with 4 port gigabit
Post by: hydrep01 on March 02, 2012, 06:23:27 AM

yes absolutly

Title: Re: DAP-1522 with 4 port gigabit
Post by: FurryNutz on March 02, 2012, 08:19:36 AM

Also make sure the Networking properties for the NICs are set up for Auto Speed Negotiation or try 1000Mb and test. If the Nics are Gb supporting and the cables are CAT5e minimum then you should see Gb Connection speed on each device.

Title: Re: DAP-1522 with 4 port gigabit
Post by: iontyre on March 05, 2012, 06:24:12 AM

Is your router supplying gigabit to the 1522?