D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: skylerfm on March 07, 2012, 08:19:44 PM

Title: Traffic on MPLS channel and Inernet Channel
Post by: skylerfm on March 07, 2012, 08:19:44 PM

Hi i have a HQ and One branch connected using dfl 860NB we need to connect across internet channel and MPLS.
Our Internet channel has 10 mb and our MPLS channel has 3 Mb.
Escenario
Firewall A
wan1 has  public Ip address
wan2 has a estatic Ip Address Point A  192.168.0.5 Gateway 192.168.0.2 (Mpls IP Router)
Lan1 192.168.10.1
Firewall B
wan1 has  public Ip address
wan2 has a estatic Ip Address Point B  192.168.1.5  Gateway 192.168.1.2 (Mpls IP Router)
Lan1 192.168.2.1

i created a VPN and its working but only on wan1 ports.
i need to route first on mpls way

I cant get traffic across wan2 (MPLS) I connected a PC directly to mpls router and i can make ping to another site but when i make ping on Firewall interface only answer the Lan IP Router (Gateway)

how can get the traffic on wan2 first?
we need special configuration using MPLS ?


Regards

Title: Re: Traffic on MPLS channel and Inernet Channel
Post by: danilovav on March 08, 2012, 08:28:03 PM

There is possible two ways - one IPsec working on wan2 first or two IPsec tunnels, per wan1 and per wan2. First "per wan2" is working second "per wan1"
What scenario is better for you?

Title: Re: Traffic on MPLS channel and Inernet Channel
Post by: skylerfm on March 08, 2012, 08:35:58 PM

Ok prefered wan 2 across MPLS way because  we have a terminal server with a internal aplication and we have IP phones too. The Internet traffic are secondary. Thanks.....