D-Link Forums

Software => D-ViewCam => Topic started by: ehall30091 on March 10, 2012, 08:48:27 AM

Title: One Camera Disconects when recording schedule is started
Post by: ehall30091 on March 10, 2012, 08:48:27 AM

Hi,
Im new here and having a problem with D-link view cam software.
Twp dcs 930-l cams on system. They both work during viewing. When I enable the recording schedule one of the camera's shuts down.

Can anyone help?

Thanks
Russ

Title: Re: One Camera Disconects when recording schedule is started
Post by: superjay on April 11, 2012, 08:13:51 AM

Mine is doing the same thing, i have version 3.2, and I have 3 Dlink 932L's If i have 1 or 2 connected, everything is fine, but if i connect a 3rd the bitrate drops to zero on camera 3, if i disconnect camera 1, or 2, camera 3 runs as expected, re-enabling the camera i disabled in the previous statement, makes camera 3's bitrate go to zero again, sporadically going to normal for a second or 2 and then going back to zero in a cycle.

Title: Re: One Camera Disconects when recording schedule is started
Post by: superjay on April 11, 2012, 10:52:09 AM

I found the solution. My QoS on my router was giving priority to the other 2 cameras, after disabling Qos altogether, all of the cameras are functioning and on have a closely matched STABLE bitstream.
Hope this helps someone.