D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-930L => Topic started by: mddawson on March 16, 2012, 08:42:43 AM
-
I got a DCS-930L today and like many others I am unable to get it to communicate via wireless with my router.
Specs:
DCS-930L Firmware Version: 1.03 (2011-07-28)
Netgear DG834G Modem/Router Firmware Version V4.01.40
I ran the wizard as per instructions and entered all the appropriate details via a wired connection. The DCS-930L detected the wireless network but fails to establish a connection once the cable is removed.
I have checked other posts here but none of those issues applies here, for example, my networks name has no unusual characters or spaces.
The fix.
I disabled the security key on my router and the camera connected. However as soon as I implement WPA/WPA2 security on the router it looses connection (yes I had set up the camera before hand). I then set my router to just WPA2 security and the camera worked again.
This means that the camera doesn't like the AES coming from a combination WPA/WPA2 setup that my Netgear router can provide and I will need to upgrade my WPA only Netgear WGPS606 wireless print server that I use to bridge my PVRs and blu-ray through - damn.