D-Link Forums

The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1522 => Topic started by: twn2 on March 16, 2012, 01:45:28 PM

Title: DNS server not shown in Static IP
Post by: twn2 on March 16, 2012, 01:45:28 PM

Under Advanced>DHCP Server, when I put in the Default DNS server of 192.168.0.1 and click save, it goes away. Meaning it doesn't show up anymore. Thoughts?

Hardware B1
FW: 2.00

Title: Re: DNS server not shown in Static IP
Post by: FurryNutz on March 16, 2012, 02:08:09 PM

What mode are you running the DAP in?
Are you connecting the DAP to a Host router or modem?

Title: Re: DNS server not shown in Static IP
Post by: vernongreen on March 24, 2012, 05:16:34 PM

I have a similar issue. The DAP-1522 is running in bridge mode bridging to a wired network through a Cisco ASA 5505.

I am running Firmware 2.03

Title: Re: DNS server not shown in Static IP
Post by: vernongreen on March 24, 2012, 05:29:35 PM

Solved!

For some reason, the DHCP Server setup will not allow me to leave the WINS server blank. As long as I fill it in, I am able to save the default DNS.

Title: Re: DNS server not shown in Static IP (RESOLVED)
Post by: FurryNutz on March 28, 2012, 07:14:07 AM

Enjoy.