D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: TonyStrk on March 21, 2012, 01:07:14 PM
-
Hello, I am currently having issues with the dhcp function on my DIR-615. The issue is some of my devices are never able to connect unless I set them up with static ip. Some of my devices are sometimes able to connect using DHCP but sometimes need to be set up with a static IP. In the log it says something along the lines of "sent out offer for IP 192.168.0.XXX" but the devices never receives the IP. The firmware says it is up to date. The hardware version is C1. Some of the devices having issues are PC's some are Macbooks and some are iphone and ipods. I'm not sure if it is related but when I look at who is using WAN some of the pc's who are connected to the internet have an ip address of 0.0.0.0.
I live in Canada and my ISP is rogers.
Thanks,
Travis
-
Some things to try:
Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options. Advanced/QoS or Gamefuel.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
Enable uPnP and Multi-cast Streaming under Advanced/Networking.
-
It Worked!!!!!
Thanks for the quick reply!
For others with the same problem, the only settings I had to change were disabling traffic shaping and enabling multi-casting so it was one of those two things.
Thanks again for the quick and on-point response,
Travis
-
Enjoy. ;)