D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: tecno13 on March 29, 2012, 11:02:12 AM

Title: routing tables dfl-800
Post by: tecno13 on March 29, 2012, 11:02:12 AM

now the situation is this:  
 vpn1 192.168.1.0 255.255.255.0  
dfl800 192.168.0.1 255.255.255.0  
vpn2 192.168.17.1 255.255.255.0  
  
the dfl800 ok on all the nets of the vpn1s and vpn2 but vpn1 no on vpn2 and peer vpn2 no on vpn1  
  
is it possible to make the routing among two vpns creating a new chart?

Title: Re: routing tables dfl-800
Post by: chechito on April 05, 2012, 06:45:41 PM

maybe some graphical explanation of the scenario can help to understand it and give sugestions

Title: Re: routing tables dfl-800
Post by: tecno13 on April 06, 2012, 04:34:22 AM

(http://www.nsgroup.it//uploadfiles/rete1.jpg)
the problem is among the two vpns VPN1 it doesn't converse with VPN2 and also the contrary one, thought that a new chart doing in the firewall everything worked

Title: Re: routing tables dfl-800
Post by: chechito on April 06, 2012, 05:52:09 PM

that scenario need to apply some changes over normal configuration to allow branch 1 communicating with branch 2 passing by the dfl 800

its necessary to declare remote branch network on the ip sec tunnels and the subsequent route from too branches.

in dfl 800 ip rule set you need to allow traficc passing from one tunnel to another form and to the respective branches.

Title: Re: routing tables dfl-800
Post by: tecno13 on April 07, 2012, 03:17:57 PM

can you make me an example? 
Thanks ???