D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: Valani_Tejendra on April 03, 2012, 05:59:36 AM
-
Why there is low speed using D-Link in compare with LAN wired connection?
-
Wireless is slower then LAN. Thats the nature of the beast.
What wireless modes are you using? Under Setup/Wireless/Manual.
Try single mode G or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.
Any other WiFi routers in the area? Use InSSIDer (http://www.metageek.net/) to find out.
Turn off Short GI, WLAN Partition and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless.
-
you said that all things was same in my router setting ....
And my router is new one just a month ago i brought..
But here problem is my internet speed is 30 mbps using wifi and it's 50 mbps using LAN.. :(
and we three people are using same internet but one of us using LAN cable and ho got more speed....
Is there any way to do same speed via cable and wifi??
BTW thaks for replaying....
-
Try some of the settings I suggested and report back.
Again, WiFi is different from wired and will not have the same speeds as wired connections. Many factors contribute to wifi and it's operation. Yes it should work well for you.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect
wireless signal range.
-
Can i set the limit for LAN connection??
-
Limits? How do you mean?
-
limit means i want to set it less speeder than Wireless......
-
No, these routers don't have any limiting abilities.
Only thing you can do is set up QoS rules if this router has additional rule options.
-
Where i can find this option?
-
Advanced/QoS Engine. Some model 615s only have a ON or OFF QoS function, some other model 615s have additional QoS rule entries which is preferred.