D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: oldgmh on April 05, 2012, 07:58:22 PM

Title: DMZ or Port Forward RE: VoIP???
Post by: oldgmh on April 05, 2012, 07:58:22 PM

Hi all,
I'm new to this forum, routing & VoIP...
My question/issue relates to my DIR-655 & my PAP2T-NA.
When I first connected the PAP2 through the 655,
I was unable to hear to person I called but they could hear me.
Then when I connected PAP2 straight to the modem all was good.

So, I then added the PAP2 to DMZ in the 655 & again all good.
Both ends could hear each other.

So, is there another way of working/setting the PAP2 access through the 655 so as not to just open the ip address right up?
???
Any advise would be greatly appreciated
by this new comer/novice/newbie.   :)
Thanks

Title: Re: DMZ or Port Forward RE: VoIP???
Post by: Sammydad1 on April 06, 2012, 12:56:48 AM

uncheck the SIP Protocol filtering.... Save and reboot the router...

Had to do that for my vonage box to be able to send fax's....was an odd thing....

Title: Re: DMZ or Port Forward RE: VoIP???
Post by: FurryNutz on April 06, 2012, 07:02:04 AM

DMZ works for this platform as well. Glad you got it working.  ;)