D-Link Forums
D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: alittlespace on April 13, 2012, 02:39:32 AM
-
I am in Malaysia. After setting up DSL-2750U Wireless N ADSL2+ 4-Port, all the pc or notebooks connected directly to the 4 ports can access the internet.
If I set wifi security to OPEN, all my notebooks can connect through wi-fi to the internet
However, when I set security to WEP (128-bit), none of my notebooks can connect through wi-fi.
I tried changing 802.11 mode and Channel numbers. Still no connection.
Can anyone help? Thanks.
-
Try WPA or WPA2? WEP might not be supported by your connecting client devices.
Contact your regional local DLink support office for further assistance.
-
Thanks. I used a friend's DSL-2640B Wireless F ADFSL2_ Router using the same WEP. All connect fine! I am trying to find the DLink support in Malaysia.
-
I am the same problem with the 2570E modem. If I disabled all wifi password, then all my devices are able to discover the SSID and connect to the modem.
In my cae I also use WEP setting. The strange thing is on the 1st day after i setup the 2570E modem, all my devices can connect to it via wifi just fine. On 2nd day, only the notebook PC that I used to setup the modem can connect to it via wifi.
-
Sounds like you should phone contact D-Link support for your region and inquire about this. Let us know how it goes.
I am the same problem with the 2570E modem. If I disabled all wifi password, then all my devices are able to discover the SSID and connect to the modem.
In my cae I also use WEP setting. The strange thing is on the 1st day after i setup the 2570E modem, all my devices can connect to it via wifi just fine. On 2nd day, only the notebook PC that I used to setup the modem can connect to it via wifi.