D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-601 => Topic started by: matoxx on April 15, 2012, 09:24:01 AM
-
please i need someone to help me figure out how to increase those numbers.
thanks.
-
Need more info here...
What Hardware version is your router? Look at sticker under router.
What Firmware (http://forums.dlink.com/index.php?topic=42458.0) version is currently loaded? Found on routers web page under status.
What region are you located?
Are you wired or wireless connected to the router?
What ISP Service do you have? Cable or DSL?
What ISP Modem do you have? Stand Alone or built in router?
What ISP Modem make and model do you have?
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.
To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged.
If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ.
-
how do i see if the modem has a dmz option and how do i input the ip adress firmware :2.00NA/hardware: B1. Regio: atlantic /eastern time zone/florida... Wireless/Cable/stand alone (motorola sb5129 (modem))
-
bump
-
Maybe someone can review your router settings with you using teamviewer (http://www.teamviewer.com) if your interested. Its safe and secure.