D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: eltoncarvalho on April 24, 2012, 08:08:10 PM

Title: DFL-1660 with multiple wan interfaces and IPSec site-to-site handshake
Post by: eltoncarvalho on April 24, 2012, 08:08:10 PM

Hi,

I have a DFL-1660 with 3 wan interfaces and on the remote site a DFL-260.

The wan1 is the default gateway in the main routing table of DFL-1660.

I would like to tunnel a ipsec site to site using the wan2 interface, but when the 1660 starts the ipsec communication to the 260, it starts the connection using the wan1 interface and its ip address.

There is any way to route connections starting from the 1660 to use wan2 ip address?

Thank-you
E

Title: Re: DFL-1660 with multiple wan interfaces and IPSec site-to-site handshake
Post by: chechito on April 24, 2012, 09:01:02 PM

yes a static route to remote ip using wan 2

Title: Re: DFL-1660 with multiple wan interfaces and IPSec site-to-site handshake
Post by: eltoncarvalho on April 25, 2012, 04:37:55 PM

What about a remote site using dynamic ip address?