D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-625 => Topic started by: bo3dom on May 29, 2012, 12:20:56 PM

Title: DIR-620 Stop working after updating firmware
Post by: bo3dom on May 29, 2012, 12:20:56 PM

Hello,

My router DIR-620 have died when i was trying to update firmware to 1.2.12 . Now no one of lamps on router are flashing... After connecting it to power, power lamp flash only for one sec and turn off. what to do?

Title: Re: DIR-620 Stop working after updating firmware
Post by: FurryNutz on May 29, 2012, 12:30:45 PM

Welcome! (http://forums.dlink.com/index.php?topic=42487.0)
What Hardware version is your router? Look at sticker under router.
What Firmware (http://forums.dlink.com/index.php?topic=47174.0) version is currently loaded? Found on routers web page under status.
What region are you located?
Are you wired or wireless connected to the router?

Did you happen to follow the following process for updating?
FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

Title: Re: DIR-620 Stop working after updating firmware
Post by: bo3dom on May 29, 2012, 01:03:49 PM

it was 1.0..6 when i tryed update it.

now i cant connect to router because it wont turn on after update :(

Title: Re: DIR-620 Stop working after updating firmware
Post by: bo3dom on May 29, 2012, 01:04:52 PM

H/W Ver. A1 F.W ver. 1.0..6

Title: Re: DIR-620 Stop working after updating firmware
Post by: FurryNutz on May 29, 2012, 01:26:45 PM

Try using the Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.0) detailed here. Let me know if you can see the Recovery mode in the browser.

If you can't get into the recovery mode then you'll need to contact DLink for support and RMA.

Keep us posted.