D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: j-marcelo on June 14, 2012, 09:28:09 PM

Title: Updating firmware...
Post by: j-marcelo on June 14, 2012, 09:28:09 PM

Hello friends.

I bought a DNS 320 today here in Brazil.
Current NAS Firmware Version:1:00
Firmware Date:09/07/2010
In the box diz Importado por D-LINK BRASIL LTDA

Which version should I upgrade (200,202,203-beta) ?
http://tsd.dlink.com.tw/downloads2008detail.asp
for WW version ?
My DNS 320 is A1 or A2 ?
Is compactible ?
Which version corrupts data ?


I will use 2 HDDs 2 Tb.

thank you
Excuse my poor English.
Marcelo

Title: Re: Updating firmware...
Post by: albert on June 14, 2012, 11:14:08 PM

Upgrading firmware doesn't effect (corrupt) your data.

As for which version to upgrade to, I suggest going for v2.00 which is the stable release. Do take note that any version above 2.01 onward doesn't allow downgrading.

Title: Re: Updating firmware...
Post by: JavaLawyer on June 15, 2012, 05:14:34 AM

Quote from: j-marcelo on June 14, 2012, 09:28:09 PM

My DNS 320 is A1 or A2 ?
...
I will use 2 HDDs 2 Tb.

The serial number sticker on your DNS-320 will indicate whether the device is hardware version "A1" or "A2".  The more recent firmware versions support HDDs larger than 2TB. Since you are have no immediate need for larger (>2TB) HDD capacity, you should be okay with firmware version 2.00 as the last poster indicated.

Title: Re: Updating firmware...
Post by: j-marcelo on June 15, 2012, 10:48:10 AM

Quote from: JavaLawyer on June 15, 2012, 05:14:34 AM

The serial number sticker on your DNS-320 will indicate whether the device is hardware version "A1" or "A2".  The more recent firmware versions support HDDs larger than 2TB. Since you are have no immediate need for larger (>2TB) HDD capacity, you should be okay with firmware version 2.00 as the last poster indicated.

Again my thanks JavaLawyer

Att.
j-marcelo

Title: Re: Updating firmware...
Post by: JavaLawyer on June 15, 2012, 10:58:41 AM

Glad I could help. Good luck.  ;)

Title: Re: Updating firmware...
Post by: j-marcelo on June 21, 2012, 11:06:56 AM

Quote from: JavaLawyer on June 15, 2012, 10:58:41 AM

Glad I could help. Good luck.  ;)

Hello,

http://forums.dlink.com/index.php?topic=47346.msg179115#msg179115

http://forums.dlink.com/index.php?topic=46679.msg170695#msg170695

The two problems above occur with versions 2.2 and 2.03 ?

My NAS is with version 1.00.
I am in doubt whether to upgrade to a 2.00 or higher (2.02,2.03).

I will use two 2TB disks.
The 2.00 version works stable with 2TB HDD ?


Very thanks again for help.
sorry my bad inglish

j-marcelo

Title: Re: Updating firmware...
Post by: petohl on June 22, 2012, 03:33:15 AM

Quote from: j-marcelo on June 21, 2012, 11:06:56 AM

The 2.00 version works stable with 2TB HDD ?

Yes, use this version. Here is no 0kb issue.