D-Link Forums

The Graveyard - Products No Longer Supported => DIR-655 => Routers / COVR => Beta Code! => Topic started by: davo123 on April 06, 2009, 06:44:10 AM

Title: [BUG] Using NTP server causes frequent reboots
Post by: davo123 on April 06, 2009, 06:44:10 AM

Hi, when i set the router to update its time using an NTP server, it reboots every 15 seconds or so making it impossible to change settings or use the internet. I'm not having any other issues. I can confirm its a bug since when I manually update the time and don't use an NTP server, everything works perfectly fine, no reboots. What I think happens is the router establishes a connection to the internet (Shows measuring gateway speed screen) and then tries to get NTP time and then screws up or something and then reboots and tries again. Or at least that's what it seems like to me.

Title: Re: [BUG] Using NTP server causes frequent reboots
Post by: EddieZ on April 06, 2009, 02:39:29 PM

Tjis is an old issue which is caused by some NTP servers. Just pick another one (or Dlink's) and see if the problem persists. If so, please state your hardware version and firmware version.

Title: Re: [BUG] Using NTP server causes frequent reboots
Post by: davo123 on April 07, 2009, 08:10:20 AM

Picked D-Link's NTP server and all is good. I was trying to use an NTP that was close to home since i'm in Australia i was trying to use 0.au.pool.ntp.org and that failed.

Title: Re: [BUG] Using NTP server causes frequent reboots
Post by: EddieZ on April 07, 2009, 09:34:57 AM

All servers give out the same time, so nothing's lost here  ;)