D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: Another Joe on July 26, 2012, 09:09:29 PM

Title: Syslog messages
Post by: Another Joe on July 26, 2012, 09:09:29 PM

I'm getting the following Syslog messages frequently on daily basis. Any ideas what they mean?

- 2012-07-26   21:06:33   warning   dlinkrouter   user   kernel   [79505.280000] SHAN=== Chaning for PS state change for type 0 subtype 160


- 2012-07-26   19:36:10   warning   dlinkrouter   user   kernel   [74082.000000] Busy environment detected

- 2012-07-26   16:34:11   warning   dlinkrouter   user   kernel   [63162.670000] 6286267 100

- 2012-07-26   16:34:11   warning   dlinkrouter   user   kernel   [63162.670000]     group     01:00:5e:00:00:fb

- 2012-07-26   16:34:11   warning   dlinkrouter   user   kernel   [63162.670000] 62862670 62667190 120000

- 2012-07-26   01:28:03   warning   dlinkrouter   user   kernel   [ 8795.130000] ->bad

Title: Re: Syslog messages
Post by: FurryNutz on July 28, 2012, 10:09:05 AM

Do you see these messages if you only have the syslog capture server going. I would disconnect all other devices and test this with just one PC and the syslog server running and see if this happens.

What FW version is currently loaded?

Title: Re: Syslog messages
Post by: Another Joe on July 28, 2012, 02:57:12 PM

I'm going to clear the log and disconnect all devices like you said.

Running on FW 2.03NA..

Title: Re: Syslog messages
Post by: Another Joe on July 30, 2012, 09:52:33 PM

FurryNutz - The logs keep coming after disconnecting the devices except my NAS which runs the syslog server and a desktop.

Title: Re: Syslog messages
Post by: FurryNutz on July 30, 2012, 10:01:13 PM

Can you remove the NAS and put on a Syslog server on just one PC?

I might do a factory reset of the router and see if you get any logs right after enabling syslog services with just one PC.