D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: eaperezh on August 13, 2012, 12:22:02 PM

Title: Flashing firmware on DFL-800 failed
Post by: eaperezh on August 13, 2012, 12:22:02 PM

Hi there,
I own a dfl-800 HW ver A2.
I originally had a different firmware running on the system but we made some mistakes and ended doing a factory reset on the unit.
Now we are at firmware 2.12.00.44 and we annot upgrade to any firmware.
The error message over GUI is:

Quote

Firmware upload failed. There is something wrong with the firmware package.
Please download the firmware image from the D-Link support website and try again.

No matter what firmware we choose, we got the same message.

Firmwares we tried:

Quote

ftp://dpartner.dlink-intl.com/Firmware/Firewall/DFL-800/
http://security.dlink.com.tw (dfl800 section)

Any ideas?

thanks,

Title: Re: Flashing firmware on DFL-800 failed
Post by: chechito on August 13, 2012, 08:45:31 PM

try using internet explorer or mozilla firefox or another version of this browsers

Title: Re: Flashing firmware on DFL-800 failed
Post by: rod.fuller on July 21, 2015, 01:02:13 PM

For anyone who finds this page, I resolved my issue of the firmware failing to install by forcing the management of the device to only use HTTP not HTTPS. I was then able to upgrade. Don't forget to turn HTTPS back on when done!

Title: Re: Flashing firmware on DFL-800 failed
Post by: FurryNutz on July 21, 2015, 01:13:27 PM

Thanks for sharing the information. Hope it helps future users.