D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: gmac on August 31, 2012, 03:02:23 AM

Title: Static route
Post by: gmac on August 31, 2012, 03:02:23 AM

Hi,

I have a DFL-210 (FW: 2.26.00.06-12653) and i can't make static route. I follow this how to:
ftp://files.dlink.com.au/products/DFL-210/REV_A/SetupGuides/How_to_set_Static_Route_on_LAN.pdf (http://ftp://files.dlink.com.au/products/DFL-210/REV_A/SetupGuides/How_to_set_Static_Route_on_LAN.pdf)
but does not work.
I want to see the LAN2 from LAN1.
Any ideas?

Thanks for any help!
G

p.s.: Sorry for my english!

Title: Re: Static route
Post by: danilovav on August 31, 2012, 08:09:11 AM

Actually, DFL-210 doesnt have LAN1 and LAN2 as separated enternet interfaces
It has only LAN as 4-port switch
So, if you have different networks within the same LAN, you have to add additional IP over LAN and make routing (Allow rules between networks)
In case you had configured DMZ as LAN2, you just need to keep default routing and make Allow rules between networks