D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-825 => Topic started by: drobinow on September 03, 2012, 02:45:52 PM
-
I'm trying to set up my DIR-835. I keep getting "Authentication failed". All I want to do is use the damn thing. What should I do?
-
Intial login is
User Name = admin
Password = <blank>
Should work. If it's acting funny see my post here and see if that helps.
http://forums.dlink.com/index.php?topic=50477.0
My 835s were a bit of a PITA setting up as you'll see in the post.
-
What browser are you using?
Try Opera or FF? If IE 8 or 9, set compatibility mode and test again.
I didn't have any trouble setting my 835 up using Opera, Safari, IE or FF.
Also setting up external routers with ISP modems with built in routers can be a PITA. :-\
-
I had this very same problem with IE 7, 8, & 9 on 4 different computers. I had turned OFF DOM storage under Advanced Settings. Soon as I ENABLED that, it worked just fine. Hope this helps you.
IMHO
isepiq 8)
-
DOM storage located on the router or with in IE? ??? You Turned it OFF or ENABLED it? ???
-
Any status on this? ???
Intial login is
User Name = admin
Password = <blank>
Should work. If it's acting funny see my post here and see if that helps.
http://forums.dlink.com/index.php?topic=50477.0
My 835s were a bit of a PITA setting up as you'll see in the post.
-
Any status on this? ???
I figured mine out on my own. There's a link to an earlier post of mine describing how I beat the problem in the post you've quoted. The OP was the one having a prob. Mine's been fine for quite a while now.
-
Ok, just wanted to make sure things were working well for you. I'm enjoying mine.
Enjoy.