D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-930L => Topic started by: dryice on November 05, 2012, 10:09:44 PM
-
LED is solid red (front) and solid blue (rear). try resetting thru the pinhole button but problem still the same. anybody can help me here. camera not detected anymore on my network. I've try switching on and off, problem still there.
-
Although you tried to reset the camera, did you follow these instructions: DCS-9XX - Factory Default Settings (http://forums.dlink.com/index.php?topic=47707.0)?
What firmware version are you using. I recommend that you update to the latest firmware version, as earlier versions have known to cause issues.
-
i have try that method, not responding at all. the LED (red and blue) is continuously switch on (no blinking LED) and the camera body gets warm/hot until i switch off the power on my plug. last firmware used is 1.04
-
my second camera (both are 930L) is having the same problem as the first,both having the same problems few days apart. i didn't do any firmware upgrade beside using it to monitor my house.anyone can help me? i've email d-link but all solution is non workable.
*both using firmware 1.04.
-
The DCS-930L is now on firmware version 1.06, so you may want to consider upgrading. Each firmware revisions contains changes to the mydlink agent which is responsible for establishing and maintaining connectivity between the DCS-930L and mydlink service. If your DCS-930L issues are confined to connectivity with mydlink, a firmware upgrade may resolve the problem.
-
Help!!! I have this same problem with my Dcs 930L. Was this issue resolved? How can you upgrade to firmware 1.08 if the camera is not accessible?
-
I observe the similar issue. I have two DCS-930L cameras. One works on 1.03 the latter on 1.08 firmware. Web server hangs from time to time on both devices.
Observations
The first sign of web server problem is that there is on image on /image/jpeg.cgi . When opening this URL the information "Web server: no such file" appears. There is also no image on /top.htm page. But the web interface still works for a while. After playing with web interface - switching tabs, refreshing several times - the web server hangs. There is no HTTP response as well as no response to ping. The led is constant red.
The cameras are connected through ethernet wire (no wifi). Disabling motion detection seems to have no effect.
How to fix this issue?
For those suffering from the issue, the solution for restoring the camera web server after the breakdown (provided that camera is connected through the wire):
1. Unplug the ethernet
2. Restart the camera by unplugging the power
3. Wait until camera starts, the red light will be blinking and then change to constant red light
4. Plug in the ethernet coord
Sometimes this steps have to be repeated.