D-Link Forums
The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1360 => Topic started by: roywax on November 21, 2012, 10:10:22 PM
-
Hello,
Logs are showing:
Jan 7 10:58:10 wlan0: A wireless client is associated - F8:1E:DF:6F:11:37
Jan 7 10:58:10 wlan0: WPA2-AES PSK authentication in progress...
Jan 7 10:58:10 wlan0: A wireless client is associated - F8:1E:DF:6F:11:37
Jan 7 10:58:10 wlan0: A STA is deleted by application program - F8:1E:DF:6F:11:37
What am i doing wrong or what is wrong?
Thanks,
Roy.
-
What mode is the 1360 being used in? AP, Bridge or Relay?
What wireless modes are you using?
Try single mode G or N or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.
Any cordless house phones?
Any other WiFi routers in the area? Link> Use InSSIDer (http://www.metageek.net/) to find out. How many?
Turn off WPS under Advanced.
Try turning off Short GI, WLAN Partition,and Extra Wireless Protection if you have it.
Enable WMM Enable (http://forums.dlink.com/index.php?topic=50738.0)
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired PC while testing.