D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: nivoro on April 20, 2009, 05:29:51 AM

Title: Port Mapping/Translation on DFL-800
Post by: nivoro on April 20, 2009, 05:29:51 AM

Hello, I have another question, on my old DFL-700 I have configured this mapping:

Source: any

Destination IP: xx.xx.xx.243
Service: Custom TCP
Source port: 0-65535
Destination port: 80

Pass to port: 3000
Pass to: xx.xx.xx.243

How Should I configure my DFL-800 to have the same?

Bye

Title: Re: Port Mapping/Translation on DFL-800
Post by: Fatman on April 20, 2009, 08:27:12 AM

Create a simple port forward as per the FAQ linked to below.  The only change you need to make is on the SAT tab of your SAT IP Rule you will need to enter a new port number (3000) in the provided "New Port" box.


http://support.dlink.com/faq/view.asp?prod_id=2922