D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: drick on April 21, 2009, 10:34:01 AM

Title: Just got my unit - please review my config and comment
Post by: drick on April 21, 2009, 10:34:01 AM

so my box came today, and i already have it up and running. let me just say that the setup portion of this is friggin EASY! under 5m and it was configured, SWEET!

I flashed the FW to 1.07
set static IP / DNS entries
set speed to GigE
enable jumbo frames to 4000
change admin password

power off

insert 2x750GB HDD's
restart unit (the boot time after adding drives was about 2m+, vs 30s the 1st time i started it)
select R1 / max capacity of 748GB
format HDD's

reboot

disable UPNP
disable itunes
confirm ftp is disabled
confirm DHCP is disabled
enable ntp/dst
confirm power management is turned on
 -HDD spin down set to 5m
confirm RAID auto-rebuild is turned off
confirm ddns is turned off
confirm lltd is turned off
save a copy of conifg off just in case

sooo..

what else do i need to do to prep the unit? am i ready to rock and roll?


 

Title: Re: Just got my unit - please review my config and comment
Post by: Shadymedia on April 23, 2009, 04:34:03 PM

To me that's looks perfect!
Rock on

Title: Re: Just got my unit - please review my config and comment
Post by: drick on April 23, 2009, 06:26:30 PM

sweet, thanks for the confirmation.

so far the thing is humming and works like a charm!