D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: nivoro on April 23, 2009, 07:47:54 AM

Title: Problem with DMZ configuration
Post by: nivoro on April 23, 2009, 07:47:54 AM

Hello, I'm sorry but I have a problem with a configuration on DFL-800.

Now, with DFL-700 I have a network like the following:

(http://img7.imageshack.us/img7/9599/netex.jpg)

Configuring DFL-800 I have a problem with DMZ, if in the rule I use "ALLOW" I haven't access to internet, if I use "NAT" I have access to internet but with address xx.yy.zz.254. I want to have internet access without translation of address, I think I should use "ALLOW" in the rule, but it doesn't work.

Can someone help me?

Bye

Title: Re: Problem with DMZ configuration
Post by: Fatman on April 23, 2009, 08:31:35 AM

You need to use transparent mode (meaning switch routes) and use allow rules.

Title: Re: Problem with DMZ configuration
Post by: nivoro on April 24, 2009, 07:43:03 AM

Thank you for reply, I have found the problem, I enable transparent mode only on DMZ and not also on WAN1.

Bye