D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-932L => Topic started by: 12clip on February 06, 2013, 09:27:58 AM
-
Trying to setup a brand new DCS-932l. Ran the wizard and it detects the camera then it prompts for the device password. User is admin, password is to be left blank is my understanding. It will not accept a blank password. Tried using resest button then retry. No change.
-
Trying to setup a brand new DCS-932l. Ran the wizard and it detects the camera then it prompts for the device password. User is admin, password is to be left blank is my understanding. It will not accept a blank password. Tried using resest button then retry. No change.
Did you follow this procedure: while the DCS-932L is powered-up, press and hold the recessed button using a paperclip for > 8 seconds.
-
I'm having the same issue. I've reset it and have tried everything I can think of with no luck.
-
Same here. Can't get by the unit password process. :(
Link to screenshot: https://www.dropbox.com/s/ao51lxm7ywa9ya7/2013-04-06%2017-48-25.jpg.
-
What firmware version are the three of you using?
-
Not sure what I have, but I believe they were updated about a month ago. I assume the current firmware version is v 1.06.
-
I called my local D-Link support yesterday for €4, and it was the installation software on the supplied CD that was out of date. Downloaded the latest off the website, and then it went smooth like a summer breeze.
Surprised that the software didn’t automatically look for a newer version (which many softwares conveniently do), but anyway my problem is solved. :)
-
Thanks for posting your solution, I'm glad everything worked itself out.
-
I have bought 5 cams and in one of the cams i am facing the same issue. I am unable to go through the new password step. It says to try again.
-
I have the same problem.
I have the latest firmware en have reset de camera.
I download the newest install software but by the set up your password for admin:
I get the message there was a problem saving your password.
-
Niemand? ???
-
I have the same problem.
I have the latest firmware en have reset de camera.
I download the newest install software but by the set up your password for admin:
I get the message there was a problem saving your password.
You may want to first try resetting the DCS-932L to the factory default settings. While the camera is powered-up, press and hold the reset button on the rear of the camera (using a paperclip) for > 8 seconds. This procedure will reset the admin password and remove all user settings.
-
I have reset the DCS-932L to the factory default settings.
I have wait 30 min.
Installed de camera with the newest software.
The camera is working with cable but no i have problems with wireless connection.
The settings As far as I can see right.
Any idea?
Excuse my English
Greetings from Holland
-
The problem is solved: router settings wpa mode: wpa2 only! and not op Auto wpa/wpa2-psk.
:)
-
I just installed a new router and 3 out of 4 cams work fine but the 4th would get through the saving password instalation.
I tried it with the standard setup cd and also with the latest setup but same problem.
I can acces the cam wireless through typing the ip in my browser (also with cable) but it would show up in my dlink account.
can any one help ?
-
Did this ever get sorted, it sounds exactly the problem I'm having, its so so so frustrating.
**contacted support, they linked me to a new version of the setup wizard to download, this worked and went past the password issue straight away :)
4 hours and all it was was a wrong wizard...for me anyway
-
I'm glad your sorted out this issue :)
For some camera models, the latest firmware versions are not backwards compatible with older Wizard software.