D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-330 => Topic started by: Danger77 on March 04, 2013, 11:49:52 AM

Title: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on March 04, 2013, 11:49:52 AM

hello everyone I am new and glad that found out about this forum.
so,I have recently installed IP TV from Caucasus Online LTD.My country is Georgia.Before that I had default
router Dir-300 (http://images2.wikia.nocookie.net/__cb20101020201356/infodepot/images/0/0a/D-Link_DIR-300_vB1a.jpg)
and when they installed IP TV they installed DIR-300NRU rev.B7 (http://i.rozetka.ua/goods/7333/d_link_dir_300_nru_b7_7333002.jpg)
and when I went to 192.168.0.1 it was defferent menu from old dir-300,so I decided to update firmware and got it from here: http://ftp.dlink.ru/pub/Router/DIR-300_NRU/Firmware/B7/
when it finished upgrading,refreshed and got this: (http://s020.radikal.ru/i708/1303/3b/56fae1188983.jpg)  so I cant access router menu.what to do?

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: FurryNutz on March 04, 2013, 12:03:32 PM

Can you do a factory reset on the NRU unit using the button in back?

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on March 05, 2013, 06:10:39 AM

I made factory reset and it fixed thanks!!!now have new firmware:)

Title: Re: DIR-300NRU rev.B7 Firmware (RESOLVED)
Post by: FurryNutz on March 05, 2013, 06:42:29 AM

Glad it's working now. Enjoy.
 ;)

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on March 05, 2013, 08:54:34 AM

have one more question: how to forward port on this dir-300?I knew how to do it on old one....

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: ptipti23 on March 12, 2013, 05:57:04 AM

in Virtual Servers menu. But it seems it buggy.

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: FurryNutz on March 27, 2013, 07:19:13 AM

Any status on this?  ???

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on April 11, 2013, 02:20:45 AM

I add ports in virtual server,but it doesnt work,in one word its very bad router,I think a patent....
Can I change this DIR-300NRU rev.B7 with other router?

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on April 11, 2013, 02:34:55 AM

I mean,isnt this router configured by Caucasus Online LTD?

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: FurryNutz on April 11, 2013, 06:50:17 AM

This router model is limited to your region I believe as it's not sold or used in other regions. I recommend that you phone contact your regional local DLink support office and inquired about this router and the configuration of it for your needs.

DLink does hand over some FW responsibilities to ISP services. ISP are sometimes sole responsible for the development and maintaining FW on certain models.

I recommend that if this is the case, either contact the ISP and have them help you with this router or get you a retail DLink router that is loaded with DLink OEM FW. 

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on April 11, 2013, 07:46:17 AM

now I connected old Dir-300(usual),but I dont have internet connection,even router instalation wizard,which is on disk canct detect router,but its connected :(

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: FurryNutz on April 11, 2013, 07:48:10 AM

Does the old router have a onboard web page and wizard?

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on April 11, 2013, 08:41:22 AM

what you mean?old router had wizard cd-disk,also when I connect old router I cant go to 192.168.0.1

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: FurryNutz on April 11, 2013, 08:47:48 AM

Most DLink routers have on board web pages. On these web pages also includes a setup wizard so you don't need the CD should it be lost or damaged.

I would try a factory reset and see if you can gain access to the routers web page again.
Turn off any 3rd party security programs while testing.
Ensure your PC is set up for automatic IP addressing. Do not use Statis IP addresses on the PC while testing.

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: Danger77 on April 11, 2013, 11:36:11 PM

I tried:
1.changed my PC ip address manually to 192.168.0.1,connected to old router,but cant access users interface.
2.changed my PC ip address manually to 192.168.0.2,connected to old router,but cant access users interface.
3.changed my PC ip address manually to 192.168.0.1 and 192.168.0.2 also added default gateway 192.168.0.250,connected to old router,but cant access users interface.

Title: Re: DIR-300NRU rev.B7 Firmware
Post by: FurryNutz on April 12, 2013, 06:47:28 AM

Happens with a different PC?
Swap LAN cables?

Factory reset the old router?

If after all this, old router could be bad.