D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2132L => Topic started by: JohnnyL on March 18, 2013, 06:39:28 AM
-
Is anyone having issues with poor wireless connectivity with the 2132L.
Works when its about 2 or 3m away from the AP... More then that and there is no connection back to the AP...
Pretty disappointed in the performance, when a $70 Foscam camera has better range then a $220 Dlink.
If anyone has any handy hints to get some better wireless performance out of the camera let me know, or do I have a dud camera...
Thanks.
-
Problem appears to have resolved itself.
Unit will not power on at all now.
I went to move it closer to the AP to see if it would work, now nothing happens.
-
Problem appears to have resolved itself.
Unit will not power on at all now.
I went to move it closer to the AP to see if it would work, now nothing happens.
:(
How long did you have it?
-
about 2 hrs.
-
I have the same problem but it boils down to the wireless router setting, in my case.
To solve this problem, basically I set the wireless router to transmit 11n signals only and on a clear channel.
Now my router can see the IP cam from 50m away and with 3partition wall in between and with signal in the -80 to -70db range according to my wifi analyser on my Android phone.