D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: nosky on April 18, 2013, 04:41:52 AM
-
Hello,
I bought recently the DNS-320 on pixmania.com
What is interesting:
- NAS has body from the DNS-320L
- Hardware is from the DNS-320
- Firmware is 1.0b (?)
Any attempt to upgrade the firmware to the latest version 2.x - fails. There is an error after loading the firmware to the NAS.
Can I ask you if that's okay?
Which firmware version is in my device?
What kind of equipment is it? (hardware from 320 and body from 320L).
Where can I find a compatible firmware for this device?
Thank you in advance for your help.
Best Regards,
Daniel
-
I doubt DNS-320 board will fit into DNS-320L casing given that the latter has a smaller built. How did you determine the hardware is from DNS-320?
-
I think I was imprecisely - hardware is the same as the DNS-320.
I mean - the same is processor (CPU clock) and RAM (128MB).
However, the body is from DNS-320L - the USB port is on the back, but the "horizontal bar" is not silver but black.
-
If I'm not wrong, your DNS-320 hardware is revision B1 and the latest firmware is 1.00b03. Thus the board used is not the same one from revision A which has the USB port in the front.
BTW, do you have picture of the circuit board?
-
Thanks for your response! :-)
I'll make a picture today and I'll send it here. (with firmware version)
-
Sorry for the lack of pictures. But I can confirm - it is actually B1 revision of the device.
As for the firmware - I have downloaded version you specified in one of your posts (and which is officially the latest version - by dlink.fr) and installed it in the NAS. The result - it turned out that I did downgrade of the firmware...
I used to have (originally uploaded):
07/12/2012
now I have:
04/26/2012
So, it was a downgrade... :-(
Now I can not find the newer version, which I originally had.
BTW, one problem still exists for me - I can not save configuration - configs file has 0 bytes. :-(
(ffp & debian are switched off)
-
Sorry to hear that. What was your original firmware version before the upgrade? And what version does it display after the upgrade?
You might want to check with your local D-Link support and request for the latest release.
-
BTW, one problem still exists for me - I can not save configuration - configs file has 0 bytes. :-(
(ffp & debian are switched off)
Try saving the configuration file using a different browser. For example, some D-Link routers have issues properly saving configuration setting files using Firefox.
-
@ albert:
Originally it was version: 1.00 of 07/12/2012
Currently I have version: 1.00 of 04/26/2012
The device works and it is most important :-)
I don't think, that Polish service will have the firmware to the hardware which is dedicated to French market...
I'll wait for new firmware on official page.
@ JavaLawyer:
Thank you very much for your advice - it is possible. In the evening, will arrange test in IE and FF (so far have tested only in Chrome).