D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-942L => Topic started by: maugly_true on May 06, 2013, 09:37:22 AM
-
I apologize in advance. I am writing from Russia , with the help of a translator, there may be inaccuracies.
My question is the following :
I'm trying to connect to the camera DCS-942L through the Rtsp Protocol.
Link do this : rtsp://176.8.123.86:554/play1.sdp
But the video signal no. Tried different players. Players determine the model of the camera , but no image and after a couple of minutes is open. What I'm not doing all right?" My link has the correct view ?
-
Do you have RTSP auth turned on? Try its address on the lan. See if you can see the http - http://ipaddress/video/mjpg.cgi?profileid=3
-
having the same issue????????
How can we fix this issue, I also need help finding the feed from the camera.
-
On Russian forums can't find the answer. I write that ostensibly on the side of the recipient Rtsp should be setting are made. But I don't think that is true. If you want to here is the link to the discussion at the Russian forum. http://forum.dlink.ru/viewtopic.php?f=13&t=160090
But I don't think that should be a setting on the side of the recipient of the signal in the Internet. I am sure that the camera itself does not give rtsp in the Internet. In the locally I have everything works. But when I give the signal to the remote server (specialized service in the Internet , which transforms the rtsp in flash) is the following : the server is connected to the camera. that is, sees its model and sees that she is the " video in signal no... The system is like this : Ip I get from using the service noip . com , turn on the router function dyndns , пробрасываю ports on the router, on-camera 80 and 554... So in General it and everything. nothing works.
Tried to use the dyndns in the camera , and get the ip directly to: www.dlinkddns.com
The same. camera is determined but the video in her no...
Rtsp video gives only inside my locally.
Just tried two different router to connect, all the settings that I have tried.
The camera tried to do on the cord and wafai...