D-Link Forums

D-Link Wireless Access Points For Business => DAP-2553 => Topic started by: besserpunk11 on July 17, 2013, 01:14:26 PM

Title: DAP-2553 - assign a dynamic IP via DHCP => doesn´t work
Post by: besserpunk11 on July 17, 2013, 01:14:26 PM: Hi together !

currently I´m one step before the decission to throw everything away ;D - I´m loosing nerves in assigning my DAP-2553 Access Point a Dynamic IP Adress via DHCP and it doesn´t work.

PLEASE HELP me, I will describe my problem in detail:

The DAP is not new, but it has been set to it´s factory defaults and it´s latest firmware is also running in it.
I´ve to change the default static IP which is 192.168.50 to dynamic IP.

Here it starts - HOME SCREEN
(http://www.bilder-upload.eu/thumb/47a6b4-1374090891.png) (http://www.bilder-upload.eu/show.php?file=47a6b4-1374090891.png)

then I go to BASIC SETTINGS > LAN
(http://www.bilder-upload.eu/thumb/8baa43-1374091138.png) (http://www.bilder-upload.eu/show.php?file=8baa43-1374091138.png)

after this I change the mode to DYNAMIC via drop down
(http://www.bilder-upload.eu/thumb/4f7332-1374091202.png) (http://www.bilder-upload.eu/show.php?file=4f7332-1374091202.png)

static IP freeces, mode has been set to DYNAMIC, next step is CONFIGURATION > SAVE AND ACTIVATE
(http://www.bilder-upload.eu/thumb/0fd706-1374091253.png) (http://www.bilder-upload.eu/show.php?file=0fd706-1374091253.png)

..a reboot is necessary
(http://www.bilder-upload.eu/thumb/26b493-1374091304.png) (http://www.bilder-upload.eu/show.php?file=26b493-1374091304.png)

thereafter the device has got it´s new dynamic IP "192.168.100.250" from the DHCP server, this is apoved because I had to change the IP in the URL to reconnect to it...
(http://www.bilder-upload.eu/thumb/91a069-1374091513.png) (http://www.bilder-upload.eu/show.php?file=91a069-1374091513.png)

and all other network information was delivered as well
(http://www.bilder-upload.eu/thumb/96d5fa-1374091695.png) (http://www.bilder-upload.eu/show.php?file=96d5fa-1374091695.png)

so far so good - if i now RESTART or POWER DOWN the device, the IP is automatically set back to factory default 192.168.0.50.

I´ve tryed it many times, with an other DAP-2553 as well, also with chrome or IE9 - same result.

Can you tell me my mistake please? Or what should I do??

Thank you !
Stefan
Title: Re: DAP-2553 - assign a dynamic IP via DHCP => doesn´t work
Post by: FurryNutz on July 17, 2013, 01:24:44 PM: Is this DAP connected to a main host router. Can you connect it to a main host router and see if the DAP can pass thru a DHCP IP address from the main host router?
Title: Re: DAP-2553 - assign a dynamic IP via DHCP => doesn´t work
Post by: besserpunk11 on July 17, 2013, 02:20:13 PM: This DAP is connected to a windows servér 2008r2 domain controller with a DHCP role, the main router is just for the internet connection. The DAP receives its reserved dynamic ip proper, i see a valid lease in the dhcp server
Title: Re: DAP-2553 - assign a dynamic IP via DHCP => doesn´t work
Post by: FurryNutz on July 18, 2013, 07:13:38 AM: What region are you located?
What FW version is currently loaded?
Title: Re: DAP-2553 - assign a dynamic IP via DHCP => doesn´t work
Post by: besserpunk11 on July 18, 2013, 03:21:29 PM: FW: 1.27
Location: Austria
Title: Re: DAP-2553 - assign a dynamic IP via DHCP => doesn´t work
Post by: FurryNutz on July 18, 2013, 06:07:37 PM: Ok, I seems you have the latest FW.

I'll recommend that you phone contact D-Link support and ask for level 2 or higher support and see if this can be resolved.
http://www.dlink.com/de/de/support/contact (http://www.dlink.com/de/de/support/contact)