D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-5222L => Topic started by: Fredddd on August 19, 2013, 11:13:42 PM

Title: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??
Post by: Fredddd on August 19, 2013, 11:13:42 PM

Hi,
After the firmware upgrade I still get emails, can stream but no access to the setup screen the only screen I get is this one
(http://i1164.photobucket.com/albums/q571/freddddfreund/dlinkerror/cd3e5c413b566c97b30b251fb9d5e195.jpg)

I did not reset the cam after Firmware upgrade! I was afraid to miss all confirguration then.

Only change it is set to dhcp my fixed ip is gone, but port settings stayed the same! Funny!

Any suggestions? What is that screen?

Thank you!
Fredddd

Title: Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??
Post by: Fredddd on August 20, 2013, 04:07:01 AM

Ok, it seems with a mobile device you can' t anymore configure the device!

Title: Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??
Post by: RYAT3 on August 20, 2013, 07:16:48 PM

Quote from: Fredddd on August 20, 2013, 04:07:01 AM

Ok, it seems with a mobile device you can' t anymore configure the device!

Try using another web browser on that pad.

Title: Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??
Post by: Allen on August 21, 2013, 03:51:33 AM

This is the design issue.
When you use mobile device to access IP Camera's IP addresss, the browser will be re-direct to the webpage as you found.

Title: Re: After Firmware upgrade to 1.1-2729 no config menu only one screen, ??
Post by: Acumen on August 28, 2013, 12:34:39 PM

Try to switch user agent (of the browser supports it) or another device then a pad :)