D-Link Forums

D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: sky016 on August 24, 2013, 02:34:30 AM

Title: DSL-2741B ver. E1 Multiple PVC
Post by: sky016 on August 24, 2013, 02:34:30 AM
I can't get  ADSL and IPTV working at the same time on this router. It works if only one of that is configured. It's seems to me that this is firmware problem, even though it's latest EU5.17.
I'm from Croatia and T-Com(HT) is my provider.
These are settings that I need to get working:
ADSL:
PPPoE/PPPoA
VPI: 0
VCI: 33

IPTV:
Bridge
VPI: 0
VCI: 40

" Cannot add new connection using specified VPI/VCI as it's incompatiable with existing connections with the same VPI/VCI. Note PPPoA or IPoA cannot co-exist with other protocols on the same VPI/VCI even with VLAN Mux. Currently, a PVC can support multiple PPPoE, or 1 other service(MER, Bridge, IpoA, PPPoA)."

Any suggestions?
Title: Re: DSL-2741B ver. E1 Multiple PVC
Post by: FurryNutz on August 24, 2013, 10:50:44 AM
I recommend that you phone contact your ISP provider and ask about settings needed on the Modem and see if this can be configured correctly if it's supported. If they can't help you then I recommend that you phone contact your regional D-Link support office and ask for level 2 or higher support.