D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: ivicask on August 31, 2013, 02:14:15 AM
-
SO i have this problem over half year now, but i was thinking some update will solve it so i waited, now my nexus 7 received android 4.3 update, and my ONEX+ 4.2.2 android upgrade, i also upgrade DIR-655 to latest Firmware Version: 2.11NA.
My problem is both of devices cant connect in WIFI N mode, i tried every possible combination of channels, Channel Width, Transmission rate, encryption, no encryption, but it still connect in max 54Mbit, if i set router to WIFI N only mode, devices see network but cant connect to it, authentication problem or network problem (no encryption active)
On other hand i have over 5 devices connected to same router who work just fine, HTC Sensation 72MBit , HTC Wildifre 72Mbit, LG TV almost 300mbit, sisters laptop 125 Mbit i think and so..
Only Nexus and ONE X+ never connect more than 54Mbit.
At work i have DSL-2641B router and both devices work just fine there and connect 72Mbit rate(N)
So this must be some incompatibility with this DIR-655 router and this 2 devices (NEXUS 7, ONEX)
I hope someone can help me here about this, thanks.
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)
- What region are you located?
- Has a Factory Reset been performed?
- Was a Factory Reset performed before and after any firmware updates?
Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0)
- Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
- What wireless modes are you using?
- 2.4Ghz Routers only: Try single mode G then try N or mixed G and N?
- Channel Width set for Auto 20/40Mhz or try 20Mhz only.
]
- What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES (http://en.wikipedia.org/wiki/Advanced_Encryption_Standard), so you might want to try TPIK (http://en.wikipedia.org/wiki/Temporal_Key_Integrity_Protocol) only or Auto TPIK and AES.
Let us know if any of the above underlined settings work...Turn OFF ALL other devices accept for the 2 in question. This could be an incompatibility issue if other devices are working correctly on N and G modes and these 2 don't.
-
I have tried exactly everything u wrote, and more! But as i wrote, its strange only this 2 Tegra based devices have problem with this router.
Is there any way i can help you fix this? I mean by providing logs from devices and router maybe if its possible?
EDIT: I reseted router again now after this latest firmware was flashed and it got FIXED!
I did reset it before but i never worked, so new firmware + device reset fixed it, thanks for reminding me to try reset it again, thank you very much!
-
Awesome. Glad its' working now. There was some Mfr fixes to Samsung devices which may have included some for yours as well.
Enjoy. ;)