D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-505 => Topic started by: tamtama on September 30, 2013, 11:51:04 PM

Title: DIR 505 password failed
Post by: tamtama on September 30, 2013, 11:51:04 PM
Hi

I just bought my DIR 505 3 days ago at Malaysia
but till now still unable to connect.
the default password on the card and on sticker unit same but cant be use/not working

tried reset the unit but still same problem.
tried login from laptop and mobilephone but all failed

can somebody help me please
Thanks
Title: Re: DIR 505 password failed
Post by: FurryNutz on October 01, 2013, 07:28:25 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)


Web Browser Configurations
What browser are you using?
Try Opera or FF? If IE 8 or 9, set compatibility mode and test again.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection

I recommend that you LAN cable connect to the 505 and the log into the routers web page and manually change the Wifi SSID and PW there at 192.168.0.1.
Title: Re: DIR 505 password failed
Post by: tamtama on October 01, 2013, 10:30:56 AM
Furrynutz,

i can't go into router web page because i cant login into the router by wifi or by Lan Cable
when i try to connect by wifi the default password not working
when i tried to connect by LAN cable it said unidentified network, when i do diagnostic with windows it said  local area connection doesn't have valid IP configuration.
tried all browser but none work
192.168.0.1, dlinkroutered4b, dlinkrouter none of this work
Already tried to reset the router as well.
connect with WPS trough my blackberry is success but failed when try to connect it said "failed to obtain an IP address

as per sticker H/W ver:A1  F/W ver:1.03
region Asia
Title: Re: DIR 505 password failed
Post by: FurryNutz on October 01, 2013, 10:32:38 AM
Did you ensure that your PC was getting a correct IP address on the PCs network adapter property settings?
Title: Re: DIR 505 password failed
Post by: tamtama on October 01, 2013, 10:48:17 AM
how do i know my PC getting correct IP address? ???
Title: Re: DIR 505 password failed
Post by: FurryNutz on October 01, 2013, 10:54:57 AM
Windows 7
Control Panel
Network and Sharing Center
On left sidebar, click manage LAN adapter settings
Right click on properties or status.
In properties, there is IPv4 on the General tab. Open the properties for IPv4 and ensure that Auto Obtain IP addressing is selected for both IP and DNS.

You could also enter in a static IP address of 192.168.0.49, Subnet Mask of 255.255.255.0 and Gateway of 192.168.0.1, save settings then re-open a browser and try 192.168.0.1.

Disable any 3rd party security programs like firewalls on the PC.

If this fails, I recommend that you phone contact your regional D-Link support office and inquire for more help and information.