D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-600 => Topic started by: omega8x on October 05, 2013, 08:00:48 PM

Title: Crossing network problem with DIR-600
Post by: omega8x on October 05, 2013, 08:00:48 PM

Hi all
I get a problem with DIR-600, my network like this:
Internet <-> Modem DSL-2750U (192.168.1.1) <-> Router DIR 600 (192.168.0.1)
PC1 (192.168.1.101), PC2 (192.168.1.102) connect to Modem DSL-2750U
Laptop1 (192.168.0.101), Laptop2 (192.168.0.102) connect to Router DIR 600

And the problem is Laptop1 Laptop2  can access PC1 PC2
But PC1 PC2 CAN NOT access Laptop1 Laptop2

What must i do to PC1 PC2 can access Laptop1 Laptop2 ?

Modem DSL-2750U Info:
Model Name: DSL-2750U
Firmware Version:   SE_1.01
Hardware Version: T1

Router DIR 600 Info:
Model Name: DIR 600
Firmware Version:   2.01
Hardware Version: Bx

Thanks

Title: Re: Crossing network problem with DIR-600
Post by: FurryNutz on October 07, 2013, 07:59:50 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)

DIR-600>Turning a router into an AP. (http://forums.dlink.com/index.php?topic=40856.0)

Title: Re: Crossing network problem with DIR-600
Post by: omega8x on October 08, 2013, 05:34:14 AM

thanks for reply, but is there anyway else? something like Firewall rule. Because there is no port free on my DIR 600 (WAN port and 4 LAN ports are currently in used, if switch to AP mode will cause insufficient port to use)

Title: Re: Crossing network problem with DIR-600
Post by: FurryNutz on October 08, 2013, 07:00:26 AM

There is not.

You could install a external network switch between the main host router and 600 in AP mode.

Title: Re: Crossing network problem with DIR-600
Post by: omega8x on October 08, 2013, 04:51:15 PM

Thanks in advance

But please follow here (http://forums.dlink.com/index.php?topic=55930), my really problem is there

Title: Re: Crossing network problem with DIR-600
Post by: FurryNutz on October 12, 2013, 10:03:50 AM

Good Luck