D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-600 => Topic started by: amebix on October 17, 2013, 04:01:20 PM

Title: DIR-600 DMZ doesn't work
Post by: amebix on October 17, 2013, 04:01:20 PM

Hello guys,

After trying several times, in different ways, i decided to open this topic because i have not found a solution.
My router DIR-600 C1 with firmware 3.05 does not work port forwarding,virtual server,nor the DMZ.
Let me explain:

I'm setting up a home web server, and i've done most of the steps for this, but the access from outside (internet) still blocked.
I tried all ways to access the server via SSH with port forwarding,virtual server and DMZ, but still have no success.

I use Linux, and ran NMAP on all attempts, but the result is always the same:

Host is up (0.00073s latency).
PORT   STATE  SERVICE
22/tcp closed ssh

Nmap done: 1 IP address (1 host up) scanned in 0.13 seconds

Does anyone have any other suggestions?
Thank you.

Title: Re: DIR-600 DMZ doesn't work
Post by: FurryNutz on October 21, 2013, 07:41:47 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)

• What region are you located?
• Has a Factory Reset been performed?
• Was a Factory Reset performed before and after any firmware updates then set up from scratch?
• Was the router working before any firmware updates?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Title: Re: DIR-600 DMZ doesn't work
Post by: amebix on October 23, 2013, 04:36:58 PM

Just to illustrate:

I have a PC running a web server on my Lan.
I put this PC in the DMZ and still can not access it via browser.
For me (accessing inside the lan),it's reach the login page of the router.
From outside (internet/web proxy/friends pc), it returns server time out.
I tried virtual server, and port forwarding too, but did not succeed.

I really do not know what to do.

PS: Port Forwarding/Virtual Server,on port 3389 (for Windows Remote Desktop),don't work too.

Title: Re: DIR-600 DMZ doesn't work
Post by: amebix on October 23, 2013, 04:38:16 PM

Sorry... i forgot the essential:

What region are you located? - Brazil
Has a Factory Reset been performed? - Yes.
Was a Factory Reset performed before and after any firmware updates then set up from scratch? - Yes. I do this right now.
Was the router working before any firmware updates? - Yes.

Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL? - Cable.
What ISP Modem Mfr. and model # do you have? - Motorola SBV5122

Title: Re: DIR-600 DMZ doesn't work
Post by: FurryNutz on October 24, 2013, 07:38:43 AM

I recommend that you phone contact your regional D-Link support office about this DMZ issue:
http://suporte.dlink.com.br/suporte/contato.php (http://suporte.dlink.com.br/suporte/contato.php)