D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: deca66 on October 19, 2013, 11:12:46 AM

Title: puTTY does not prompt after login
Post by: deca66 on October 19, 2013, 11:12:46 AM
Hello,

*updated*
I have my DNS-323 since years now. I have installed fun-plug so as to be able to connect by telnet.
But I do not remember how to connect now (I can connect through the web interface). Does aynone could help ?

Thanks
Title: Re: Don't remember how to telnet !
Post by: dosborne on October 19, 2013, 01:29:59 PM
Assuming you are running windows, open a command prompt or in the run box type "telnet {hostname or IP address}"

Then log in.
Title: Re: Don't remember how to telnet !
Post by: fordem on October 19, 2013, 01:54:30 PM
deca66 - there is no telnet server running on an "unhacked" DNS-323 - the web interface is the only way to configure it.

dosborne - not all versions of Windows have the CLI telnet client available on a normal installation.
Title: Re: Don't remember how to telnet !
Post by: deca66 on October 19, 2013, 02:15:42 PM
Quote from: fordem on October 19, 2013, 01:54:30 PM
deca66 - there is no telnet server running on an "unhacked" DNS-323 - the web interface is the only way to configure it.

dosborne - not all versions of Windows have the CLI telnet client available on a normal installation.
I have telnet, but it doesn't work : "cannot open connexion on port 23".
I remember I had install fun-plug and all that stuff (http://dns323.kood.org/howto:telnet#installing_telnet (http://dns323.kood.org/howto:telnet#installing_telnet)) but I do not remember how to connect now.

What can I do now ? Resetting ?
Title: Re: puTTY does not prompt after login
Post by: deca66 on October 21, 2013, 10:21:29 AM
An update. I can now launch putty. I give the root user/pwd. It seems connecting to the device, but after, putty does not give me the prompt. I have the good passwd (I can connect through the web interface with it).
After connection, putty tells :
<<
Could not chdir to home directory /home/admin: No such file or directory


BusyBox v1.00-pre1 (2009.05.07-06:36+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

>>
Then nothing.

Any ideas ?
Title: Re: puTTY does not prompt after login
Post by: deca66 on October 22, 2013, 10:18:06 AM
Hi there,

Here is the event log of my putty window :
2013-10-22 19:25:43   Looking up host "192.168.0.99"
2013-10-22 19:25:43   Connecting to 192.168.0.99 port 22
2013-10-22 19:25:43   Server version: SSH-2.0-OpenSSH_5.2
2013-10-22 19:25:43   We claim version: SSH-2.0-PuTTY_Release_0.60
2013-10-22 19:25:43   Using SSH protocol version 2
2013-10-22 19:25:43   Doing Diffie-Hellman group exchange
2013-10-22 19:25:43   Doing Diffie-Hellman key exchange with hash SHA-256
2013-10-22 19:25:47   Host key fingerprint is:
2013-10-22 19:25:47   ssh-rsa 2048 e8:12:90:cd:1a:19:57:73:b4:a2:69:14:ff:88:44:63
2013-10-22 19:25:47   Initialised AES-256 SDCTR client->server encryption
2013-10-22 19:25:47   Initialised HMAC-SHA1 client->server MAC algorithm
2013-10-22 19:25:47   Initialised AES-256 SDCTR server->client encryption
2013-10-22 19:25:47   Initialised HMAC-SHA1 server->client MAC algorithm
2013-10-22 19:25:55   Keyboard-interactive authentication refused
2013-10-22 19:26:02   Sent password
2013-10-22 19:26:02   Access granted
2013-10-22 19:26:02   Opened channel for session
2013-10-22 19:26:02   Allocated pty (ospeed 38400bps, ispeed 38400bps)
2013-10-22 19:26:02   Started a shell/command

Then nothing happens, no prompt is displayed.

What happens here ?
Title: Re: puTTY does not prompt after login
Post by: fordem on October 22, 2013, 10:43:56 AM
deca66

I think you need to recognize that you are running software on the DNS-323 that was not developed by D-Link, and is not supported by D-Link - you would probably get better results asking for assistance from the provider of that software.
Title: Re: puTTY does not prompt after login
Post by: deca66 on October 22, 2013, 02:02:57 PM
Disappointed but received.