D-Link Forums
D-Link VPN Router => DSR-500N => Topic started by: LeoAj on October 20, 2013, 11:34:57 PM
-
Does any one know how to access USB drive connected to DSR500n ?
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)
- What Hardware version is your router? Look at sticker under router.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
Does this help:
http://forums.dlink.com/index.php?topic=46133.0 (http://forums.dlink.com/index.php?topic=46133.0)
-
Product : DSR-500N
Firmware Version: 1.06B53_WW
Hardware Version: A1
the link dint help me much.
i can mount the USB pen drive to the router after that how to access that pen drive in network ??????
-
So mapping using the information in the sticky didn't work?
Check the User Manual for any information.
I would phone in to D-Link and ask them.
-
The user manual has no much info on this
-
Let us know what they say on the Phone...
-
Any status on this? ???
-
in windows :
- Start "run"
- type there IP of your router eg. 192.168.10.1
- it will open that IP with Disk-1 and Disk-2 folders you should be able to see files...
but in my case just until 250GB
-
http://forums.dlink.com/index.php?topic=47358.0 (http://forums.dlink.com/index.php?topic=47358.0)
in windows :
- Start "run"
- type there IP of your router eg. 192.168.10.1
- it will open that IP with Disk-1 and Disk-2 folders you should be able to see files...
but in my case just until 250GB