D-Link Forums
The Graveyard - Products No Longer Supported => DNS-323 => D-Link Storage => Beta code! => Topic started by: nohelp on May 24, 2009, 09:31:37 AM
-
Hardware Version:
Firmware Version:1.08b
Software Version (Easy Search):N/A
Harddrive 1:Seagate ST31000340AS
Harddrive 2:
Problem Type:Function does not work
Problem Description:
When you add a new file to the Upnp server it does not add it to the media list automatically. You need to do a manual refresh for it to show up.
Function Tested:
Test Procedure (steps to reproduce): Added file, it didn't show up. Manual refreshed, it showed. repeated multiple times
-
I have had no problems with files being added in my upnp automatically .. i use a ps3 and a d-link dsm-750 to pull from my 323 and no problems at all .. normally i will download over night and put the files in my upnp folder in the morning and they are there that evening so not sure how long but they do show up ...
I was on f/w 1.06 and upgraded right to 1.08b and have 2 Seagates ST31500341AS drives in there
-
OK, my system just crashed and needed a reboot. Now it seems to be working like it should. I'll test it some more over the next couple of days to see if I can reproduce the problem.
-
This is still happening to me. The only way to get it recognize a new file is to manually refresh. Ireset thing to default, reinstalled, changed directory of the file location and still doesn't work. I hope it's fixed on the new version.