D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-645 => Topic started by: fungahh on December 05, 2013, 05:27:22 AM
-
Thu Dec 5 14:22:53 2013 Time synchronized
Thu Dec 5 14:22:47 2013 no servers found in /etc/resolv.conf, will retry
Thu Dec 5 14:22:46 2013 DHCP: Client receive ACK from 10.40.8.1, IP=xxx.xxx.225.179, Lease time=900.
Thu Dec 5 14:22:45 2013 DHCP: Client send REQUEST, Request IP xxx.xxx.225.179 from 10.40.8.1.
Thu Dec 5 14:22:45 2013 DHCP: Client receive OFFER from 10.40.8.1.
Thu Dec 5 14:22:45 2013 DHCP: Client send DISCOVER.
What Hardware version is your router?
A1
What Firmware version is currently loaded?
1.04
What region are you located?
Sweden
Are you wired or wireless connected to the router?
Wired CAT-6
Has a Factory Reset been performed?
Yes
What games are you playing? PC or game console?
PC
What ISP Service do you have? Cable or DSL?
Cable (From wall outlet)
What ISP Modem Mfr. and model # do you have?
I've DIR-645 directly plugged in from the wall outlet (is this the reason for my disconnects?)
-
Thu Dec 5 14:22:53 2013 Time synchronized
Thu Dec 5 14:22:47 2013 no servers found in /etc/resolv.conf, will retry
Thu Dec 5 14:22:46 2013 DHCP: Client receive ACK from 10.40.8.1, IP=xxx.xxx.225.179, Lease time=900.
Thu Dec 5 14:22:45 2013 DHCP: Client send REQUEST, Request IP xxx.xxx.225.179 from 10.40.8.1.
Thu Dec 5 14:22:45 2013 DHCP: Client receive OFFER from 10.40.8.1.
Thu Dec 5 14:22:45 2013 DHCP: Client send DISCOVER.
What Hardware version is your router?
A1
What Firmware version is currently loaded?
1.04
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
What region are you located?
Sweden
Are you wired or wireless connected to the router?
Wired CAT-6
Has a Factory Reset been performed?
Yes
What games are you playing? PC or game console?
PC
What ISP Service do you have? Cable or DSL?
Cable (From wall outlet)
What ISP Modem Mfr. and model # do you have?
I've DIR-645 directly plugged in from the wall outlet (is this the reason for my disconnects?)
I would start there and ask your ISP to verify signal and data at the wall out let or where ever the cable you connect is connected to on there side. There is a switch or router someplace in the building that your cable is connected to and needs to be checked. I presume if you connected your PC directly to the wall out let, by passing the 645 router that the PC would exhibit the same thing.
Let us know what you find out.
-
If I connect my PC directly to the wall outlet everything works flawlessly
EDIT: And yes, I have performed a factory reset after the firmware update
-
Ok, can you find the connection speed of the cable coming form the wall? is it 10, 100 or 1000Mb?
Connect your PC and look at the connection speed there. You can set a manual WAN port speed on the 645, try and set this to a manual speed that matches what your PC reports...
When you upgraded FW, did you get the FW file from your regional D-Link support site?