D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-657 => Topic started by: golescu_nicolae on December 13, 2013, 12:32:05 AM
-
Hi,
I have a problem with my DIR-657 router. I attached an external HDD (Seagate 2TB 3 partitions NTFS) to my router and I activated the DLNA server function of the router. I can access the HDD only from my laptop, but I can not access it from my Samsung 32UE6100 TV (this is the reason why I bought this router). I tried it with the TV connected by LAN wire and also by wireless connection to the router and no success.
I can access the HDD from my TV only if I connect it directly to the TV USB port, but I want to use it connected to the router, so I can access it from both Laptop and TV.
Does anyone have any idea how can I make the HDD visible to the TV?
Thank you!
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)
- What Hardware version is your router? Look at sticker under router.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router.
- Turn off ALL QoS (http://vonage.nmhoy.net/qos.html) or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON.) options, Advanced/QoS (http://en.wikipedia.org/wiki/Quality_of_service) or Gamefuel.
- Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
- Enable Use Unicasting (compatibility for some ISP DHCP Servers) under Setup/Internet/Manual.
- Turn on DNS Relay under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench (http://forums.dlink.com/index.php?topic=53222.0)
- Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting.
- Ensure devices are set to auto obtain an IP address.
- Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI (http://en.wikipedia.org/wiki/SPI) to test.
- Enable uPnP (http://en.wikipedia.org/wiki/Upnp) and Multi-cast Streaming (http://en.wikipedia.org/wiki/Multicast) under Advanced/Networking. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option.
- Turn off WISH, and WPS under Advanced.
- WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
- Set current Time Zone, Date and Time. Use an NTP Server (http://forums.dlink.com/index.php?topic=48695.0) feature. Tools/Time.
How is the TV connected? Wired or Wireless?
We have been tracking an issue with Media Server and USB not appearing in Windows Networking. I presume since your LT is seeing it that it's working for you. In this case there is a possibility that the TV is not seeing it and is not displaying it correctly. I recommend that you contact the Mfr of the TV for support. I presume there maybe some format or connection that either the TV is specifically needs or there could be a configuration fault or the TV is faulty.
-
Hi,
Thank you so much for your fast reply!
Unfortunately, the TV is well set up and it supports DLNA and it is able to view the HDD over another routers. so it seems to be a problem related to the router settings. the reply you gave to me is the "standard" one that I saw on the forum and already made these settings, but with no result.
I am looking forward to receive any new hints from you!
thank you!
Best regards,
Nicolae Goelscu
-
What Firmware version is currently loaded? Found on the routers web page under status.
What region are you located?
-
hi,
I am using the router in Romania, East Europe. the first time I start up my router I installed the firmware available on the dlink website. the next day I contacted Dlink Romania and they gave me another firmware, but no result with none of them..
-
Ok, I'd get ahold of D-Llink again and see if they can fix it on there side. I've forwarded this onto D-Link here in the NA region. I can't guarantee anything as we are in different regions.
-
did you get a solution to your issue? I am facing the same issues...
TV- Samsung EH5300R
DLink DIR-657
Hardware Version: A1
Firmware Version: 1.02
Region - India
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- Are you wired or wireless connected to the router?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
- Was the router working before any firmware updates?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
- Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
- What ISP Modem service link speeds UP and Down do you have?
Is the TV wired or wireless?
Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)
- Ensure the default (dlink) SSID name is changed. Can be anything and not something that's already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
- What wireless modes are you using?
- 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
did you get a solution to your issue? I am facing the same issues...
TV- Samsung EH5300R
DLink DIR-657
Hardware Version: A1
Firmware Version: 1.02
Region - India