D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: avasile on December 18, 2013, 09:56:38 AM

Title: Remote Access to Synology NAS
Post by: avasile on December 18, 2013, 09:56:38 AM

Hello everyone.
I will need your suggestion on how to access a Synology NAS behind a DIR-655.
I had it working but I messed with my router and of course no backup was saved so i cannot remember how to do it. I do this pretty often and I know it should be a virtual application but I cannot get it to work.

My settings:
- LAN IP of Synology; 192.168.100.76
- port is 5000
- I want to be able to use the same port when coming in from outside; if not we can try something else

Please advise.
Thank you.
AV

Title: Re: Remote Access to Synology NAS
Post by: FurryNutz on December 18, 2013, 10:05:10 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• What ISP Modem service link speeds UP and Down do you have?

Any examples here help maybe?
http://forums.dlink.com/index.php?topic=56861.0 (http://forums.dlink.com/index.php?topic=56861.0)

Title: Re: Remote Access to Synology NAS
Post by: avasile on December 18, 2013, 10:41:22 AM

Hello and thank you.
It is a A4, version 1.32 NA
It is a cable box with mostly static IP address ( it changes once every 2-3 months).
I wish I can upload an image but I did not see how....

I have the same settings as in the example you mentioned but different port numbers.

Title: Re: Remote Access to Synology NAS
Post by: avasile on December 18, 2013, 10:52:29 AM

Here is a screen of what the settings are

(http://snag.gy/QSQWB.jpg)

Title: Re: Remote Access to Synology NAS
Post by: FurryNutz on December 18, 2013, 01:41:37 PM

What ISP Modem Mfr. and model # do you have? Just want to confirm that you don't have a double nat issue here...

Also

• Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI (http://en.wikipedia.org/wiki/SPI) to test.

Title: Re: Remote Access to Synology NAS
Post by: avasile on December 21, 2013, 07:36:31 PM

I missed your reply ...
I am running out of options here .... I even called Dlink support .... it was not fun but I gave since the tech had no idea.
To simplify things I setup FTP server on my server - so now I am trying to setup a simple rule that will open t FTP access to the laptop ... no luck.
 
I used both virtual server and port forwarding .... it seems that I cannot use both of them at the same time since they will conflict.

Help ....

Title: Re: Remote Access to Synology NAS
Post by: FurryNutz on December 23, 2013, 12:32:57 PM

If your using any PF or VS features, disable uPnP and test again.

Ensure NAT is set for Endpoint Independent as well.