D-Link Forums
D-Link Network Video Recorders => DNR-322L => Topic started by: aaneville@outlook.com on January 01, 2014, 05:07:50 AM
-
Hi,
I have just noticed that my DNR-322L has no audio stream.
I updated to firmware 2.00 and when I tested on playback there is no audio. Same when viewing live video.
Everything is configured with audio on and I get audio from the cameras.
Is it possible that this is a result of the firmware update? I am almost certain that the audio stream was working before the upgrade.
Has anybody checked their DNR-322L for audio after the firmware upgrade?
Any help would be very welcome.
Andrew
-
You can safely install an earlier firmware version if you want to test your theory. Older firmware is posted here: ftp://ftp2.dlink.com/PRODUCTS/DNR-322L/REVA/
What cameras do you have connected to your DNR-322L?
-
I have 3 DCS-932L cameras with firmware 1.06B4
When I go back to the earlier firmware the DNR-322L no longer connects to the cameras. To test I will have to reconfigure the cameras.
I just wondered if anyone else has done the firmware upgrade and then tested the audio stream.
-
You can try the 1.50 beta, which was the last major release that the community has been successfully using before the recent 2.00 update. Unfortunately, I do not own a DNR-322L to test. :-\
-
I have tried 1.50 and 1.40. The firmware loads but the cameras will not connect. No video channel. I have not had a problem in the past going back to a different firmware version so this is something new with the 2.00
As I was not able to connect the cameras I have gone back to 2.00 and everything is OK except for no audio stream.
When I access the cameras individually or through my iPhone I get audio no problem.
When I access the DNR-322L on my iPhone and look at the cameras it shows "Audio Stream: NO" This really looks as though there is a problem with the firmware 2.00.
Any ideas?
Andrew
Oh and Happy New Year!