D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: boomh on January 31, 2014, 03:57:11 PM
-
Alright so wifi was sluggish so I decided to power off/on usually is fine. But this time nothing can connect to it through wifi. It shows its broadcasting but nothing will connect.
Any help?
Also any suggestions on upgrade antennas? software etc.. suggested powerlines, etc...
ver. b1 2.10
-
I ended up resetting the router so it works now. But any ideas on better signal besides changing to a single mode? Like new antennas? compatible powerlines etc..
-
Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)
- Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
- What wireless modes are you using?
- 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
- Channel Width set for Auto 20/40Mhz or try 20Mhz only.
- Try setting a manual Channel (http://en.wikipedia.org/wiki/Wireless_channel) to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
- What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES (http://en.wikipedia.org/wiki/Advanced_Encryption_Standard), so you might want to try TPIK (http://en.wikipedia.org/wiki/Temporal_Key_Integrity_Protocol) only or Auto TPIK and AES.
- What wireless devices do you have connected?
- Any cordless house phones?
- Any other WiFi routers in the area? Link> Use InSSIDer (http://www.metageek.net/) to find out. How many?
- If you have any of these options, Try turning OFF or ON Short GI (http://www.smallnetbuilder.com/wireless/wireless-features/30969-what-do-80211ns-optional-features-mean-for-you), WLAN Partition, HT 20/40 Co-exhistance and Extra Wireless Protection if you have it. Recommended settings are default. Under Advanced/Advanced Wireless.
For any future FW updates:
FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
-
Thanks!
Got it working now.
-
What fixed it? We are all curious. ???
Glad it's working now. Enjoy. ;)
-
Will before you replied.. I just reset it and re installed it and it works fine now. lol
-
Ok, just curious. Might try some of the suggestions.
Enjoy. ;)