D-Link Forums

The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1320 => Topic started by: CraigfrmIL on February 16, 2014, 03:06:48 PM

Title: Cannot connect Samsung TVs to DAP-1320
Post by: CraigfrmIL on February 16, 2014, 03:06:48 PM

My Samsung TVs connect with my router but I cannot connect them to the DAP-1320.  Other devices such as laptops and tablets will connect with the DAP-1320.  I found a couple of messages from people that have the exact same problem but I don't see any solutions.  Is there a solution to this problem?

Craig 

Title: Re: Cannot connect Samsung TVs to DAP-1320
Post by: FurryNutz on February 20, 2014, 07:40:24 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)

• What Hardware version is your DAP? Look at sticker under DAP.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DAPs web page under status.
• What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)

• Ensure the default (dlink) SSID name is changed. Can be anything and not something that's already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel (http://en.wikipedia.org/wiki/Wireless_channel) to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES (http://en.wikipedia.org/wiki/Advanced_Encryption_Standard), so you might want to try TPIK (http://en.wikipedia.org/wiki/Temporal_Key_Integrity_Protocol) only or Auto TPIK and AES.

If you temporarily disable the security on the Wifi, will the TV connect then?
If other devices are connecting to the DAP, I presume that the issue could be with the TV. You'll need to refer to the TV Mfr support site for information and help. I recommend ensuring any FW is up to date on the TV and check to see what wireless modes and security modes the TV support and test accordingly.

Title: Re: Cannot connect Samsung TVs to DAP-1320
Post by: FurryNutz on March 03, 2014, 11:43:45 AM

Any status on this?  ???