D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: louie_081475 on February 24, 2014, 02:03:28 PM

Title: Dlink DNS-232 NAS Server
Post by: louie_081475 on February 24, 2014, 02:03:28 PM

hello guys ask advice for may problem, configure Dlink DNS-232 server to our network after i map the drive letter of nas drive when i restart the NAS driver letter always disconnect  im using windows 7 and dlink dir-655 wireless n router.

Title: Re: Dlink DNS-323 NAS Server
Post by: JavaLawyer on February 24, 2014, 02:44:13 PM

Are you mapping the IP address only (e.g. \\192.168.x.x) or the Volume as well? (e.g. \\192.168.x.x/Volume_1)

Title: Re: Dlink DNS-232 NAS Server
Post by: louie_081475 on February 24, 2014, 03:33:14 PM

i map drive using dlink utility, i think i map only ip add, how can map with volume??

Title: Re: Dlink DNS-323 NAS Server
Post by: JavaLawyer on February 24, 2014, 03:55:55 PM

There are some instructions posted in here: ShareCenter - Important Posts & Information (http://forums.dlink.com/index.php?topic=58137.0)

Title: Re: Dlink DNS-232 NAS Server
Post by: louie_081475 on February 24, 2014, 04:07:37 PM

sir thanks very helpful. try to read and apply later

Title: Re: Dlink DNS-323 NAS Server
Post by: JavaLawyer on February 25, 2014, 05:09:41 AM

I noticed that the subject to your post was labeled "DNS-232", I subsequently changed it to DNS-323, and you changed it back to DNS-232. D-Link does not make a model (that I know of) called the DNS-232. Can you verify that you have a DNS-323?